车间需要的一切

ATE 专用工具

Brake fluid test unit BFT 320

项目编号
03.9311-0080.4
730071

Brake fluid is hygroscopic, which means that it absorbs water over the course of time, thus causing the boiling point to drop (risk of vapor lock). That is why it needs to be checked regularly and, if necessary, replaced.
The particularly inexpensive ATE BFT 320 allows measurement of the boiling points of all glycol-based brake fluids ( DOT 3, DOT 4, DOT 5.1) with the same precision as in a laboratory.
The ATE BFT 320 is an extremely practical tester with a 12-Volt power supply. This means that it is simple to perform the measurement at the expansion tank in the vehicle.

A specimen vial and a pipette are supplied to allow measurements to be performed away from the vehicle.
The simple menu guidance for users is a highlight of the ATE BFT 320. Measurement takes only around 30 seconds and the measured value is shown on a digital display. A recommendation as to whether to replace the brake fluid is then shown. This means that it is no longer necessary to change brake fluid merely on suspicion.

价格:
根据要求

优点

  • The immersion heater method is the only one that provides exact measurements, regardless of the brake fluid type
  • Menu guidance makes it extremely simple to use (D, GB, F, I, E, P ,PL, CZ, SK) 
  • Digital display of the boiling point and recommendation as to whether to change the brake fluid (D, GB, F, I, E, P ,PL, CZ, SK)
  • Practical tester, measurement can be performed in the expansion tank
  • 12 Volt power supply
  • Suitable for brake fluids with boiling points
    up to 320 °C

交货

  • Complete test unit
  • Specimen vial and pipette
  • Operating instructions
  • Robust case

技术规范

Accuracy:
at 100-180° C: +/- 3%
> 180° C: +/- 5%
Measuring time: approx. 30 seconds
Power supply: 12 Volt