5-liter pneumatically operated brake bleeding unit FB 5p
The ATE FB 5p is a pneumatically operated bleeding unit for 5 liters of brake fluid. With the wide range of ATE accessories, all hydraulic clutch and brake systems - including ABS, EDS or ESP - can be filled, flushed and bled. A low-pressure leakage test of a brake or clutch system can also be easily carried out. Only one person is needed to operate the ATE FB 5p.
A particular advantage of the ATE FB 5p is that, once it has been topped up with compressed air, it can be used anywhere, so it is ideal for "off-premises" work.
The ATE FB 5p works according to the principle of medium separation, i.e. the brake fluid is separated from the compressed air by a diaphragm, so that air can never enter the brake system. One single filling of compressed air is sufficient to drain 5 liters of brake fluid. The working pressure (the pressure with which the new brake fluid is fed into the brake system) is adjustable and can be seen on the working-pressure manometer. At 3.5 meters, the length of the filling hose is sufficient for all requirements.
It goes without saying that all materials used on the FB 5p are completely resistant to brake fluid.
The ATE FB 5p is fitted with a bleeding spigot No.: 20 (Europe spigot).
- Particularly robust unit
- Once topped up, the unit is mobile and can be used anywhere
- Unit complete
- Operating instructions
- Bleeding spigot No.: 20 (Europe spigot)
|Brake fluid capacity:||5 liters|
|Working pressure (compressed air):||6.5 bar|
|Operating pressure (brake fluid):||2 bar (0 to 3 bar adjustable)|
|Filling hose length:||3.5 m|
|Total height:||510 mm|