车间需要的一切

ATE 专用工具

Pressure gauge unit

项目编号
03.9305-1020.4
730032

The ATE pressure gauge unit is extremely versatile. It allows measurement of all pressures throughout the hydraulic brake system and in the vacuum system (brake power assist unit etc.). Thanks to two measuring circuits with high-pressure manometers, the pressure in both brake circuits can be measured simultaneously, allowing simple comparison. This is the only way to check or adjust the regulators.
One of the measuring circuits also has a low-pressure manometer that is switched off at approx. 9.5 bar. This allows both low-pressure and high-pressure leakage tests to be carried out. The unit is connected to the hydraulic system by means of an adapter instead of bleeder valves as well as plug-and-socket connectors and low-stretch mini-hoses. Suitable adapters for connection to the test connectors are also supplied with the unit. The vacuum manometer allows the vacuum system to be tested for leaks and correct operation. Suitable adapters for connecting the unit are also supplied. All accessories are stored in appropriate holders inside the unit.

价格:
根据要求

优点

  • Robust construction
  • Measurement of directly applied pressure / vacuum
  • The use of mini-hoses avoids hose stretching, thus providing high measuring accuracy
  • Connection fittings are also supplied and are stored in the unit

交货

  • Unit complete with connecting hoses
  • 2 sets of connection nipples (7 items M 6 to M 12 x 1.5)
  • 2 test connection adapters
  • 2 plug-on nipples (male)
  • 4 vacuum connecting sleeves
  • 1 elbow connection complete (banjo screw, ring support)
  • Operating instructions

技术规范

Low-pressure measuring range 0 to 9.5 bar
High-pressure measuring range 0 to 250 bar
Vacuum measuring range 0 to -1.0 bar
Automatic cutoff of the low-pressure manometer at approx. 9.5 bar
Length of connecting hose: 3.0 m
Length of vacuum hose: 2.0 m
Dimensions: H x W x D 420 x 350 x 220 mm
Weight: 10 kg